Auto Channel Search - Televes RSD-7255 User Instructions

Digital satellite receiver
Table of Contents

Advertisement

User instructions
Auto CH Search
All of the channels can be searched supposed that the selected satellite is
properly assigned to antenna in the "Antenna Setup" menu.
1
When you place the cursor on an antenna, the related information will
be displayed automatically. Then, select antenna as many as
necessary from 1 to 16 to search channels by pressing OK (LIST)
key.
Select any one search option:
2
- New TP: This will search only for newly added transponders in the
selected satellite.
- FTA Only: This will search all channels except scrambled channels
in the selected satellite.
Note: To avoid having an excessively long list of channels due to the
inclusion of encoded channels, it is advisable to activate this option
when the automatic search is activated.
This option is already activated by defect.
- Sort by Scramble: This will search all channels in the selected
satellite and place scrambled channels to the last of the list.
Select "OK" box and press OK (LIST) key.
3
4
Select "Start" and press OK (LIST) key to start searching channels.
5
When you start to search channels, the following will be shown on the
screen:
- The name of satellite being searched.
- The number of transponder being searched.
- The percentage of searching progress.
- The name of channels found.
If you want stop the searching during "Auto Searching", press EXIT
6
key on the RCU, then, "Please wait for closing" message will turn up
on the screen.
7
When searching is completed, the numbers of channels found will be
displayed on the screen.
When you go out of the "Auto Ch. Search" menu by pressing EXIT
8
key, "Please wait for saving data" message will turn up on the screen
to save the found channels in the list.
For reference:
- The number of transponders can be bigger than the preprogrammed because this RSD-7255 utilizes the NIT information
transmitted by satellite to add up channels automatically.
- If you wish to search for channels directly indicating band "L" frequencies (950 - 2150 MHz) see "TP Setup" .
16
"RSD - 7255"
Antenna Select
1
9
Information
2
10
3
11
Antenna
1
4
12
Satellite
ASTRA
5
13
Univ. LNB
YES
6
14
LNB Freq. 1
9750
7
15
LNB Freq. 2
10600
8
16
0/12 Volt
Not Used
14/18 Volt
Not Used
Search Option
22KHz
Not Used
Start
DiSEqC
Port A
Antenna Select
1
9
Information
2
10
Search Option
3
11
Antenna
1
4
12
Satellite
ASTRA
New TP
5
13
Univ. LNB
YES
FTA Only
6
14
LNB Freq. 1
9750
Sort by Scramble
7
15
LNB Freq. 2
10600
8
16
0/12 Volt
Not Used
OK
14/18 Volt
Not Used
Search Option
22KHz
Not Used
Start
DiSEqC
Port A
Antenna Select
1
9
Information
2
10
3
11
Antenna
1
4
12
Satellite
Searching 1.ASTRA
ASTRA
TP/20/49
5
13
Univ. LNB
YES
42%
6
14
LNB Freq. 1
9750
Found The Following Channel(s) ...
7
15
LNB Freq. 2
10600
8
16
0/12 Volt
Not Used
14/18 Volt
Not Used
Search Option
22KHz
Not Used
Start
DiSEqC
Port A

Advertisement

Table of Contents
loading

Table of Contents