Televes RSD-7255 User Instructions page 15

User instructions
Antenna Setup
For reference:
- In the case of using switch, please keep in mind the combination of antenna and each switch ports.
- It is not allowed to use 22KHZ tone switch and DiSEqC switch at the same time because the attributes of both switches are
utilizing the same 22KHZ tone.
- If you wish to use a "Tone Burst" switch even when it is not possible to select it in the menu, you can use it via the DiSEqC
option. When the antenna that is connected to the "A" input of the "Tone Burst" switch has been configured, select Input "A"
in the "DiSEqC" option in the "Antenna Setup" menu. Proceed in the same way when configuring the antenna that is con-
nected to the "B" input of the "Tone Burst" switch, and in this case, select Input "B" in the DiSEqC option.
- It is possible to manually look for the channels that directly indicate band "L" frequencies (950 - 2150 MHz). To do this,
select an available antenna in "Antenna Setup" and assign it to one of the free satellite positions (for example: NEWSAT1).
Then select "NO" in "Univ. LNB" (Univ. LNB), and enter "0" as the frequency of the local oscillator in both cases.
15
"RSD - 7255"