Table of Contents
Advertisement
Step 2: Verify U1084A Shipment Contents
Return a Module for Service
Should it become necessary to return a module for repair or service, follow the steps
below:
1. Review the warranty information shipped with your product.
2. Contact Keysight to obtain a Return Material Authorization (RMA) and return
address. For assistance finding Keysight contact information, go to
www.keysight.com/find/assist
service) or refer to the "Support" information on the product web page at
www.keysight.com/find/U1084A.
3. Write the following information on a tag and attach it to the malfunctioning equip-
ment:
Name and address of owner. A P.O. box is not acceptable as a return address.
Product model number (for example, U1084A).
Product serial number. The serial number label is located on the top cover of the
module. The serial number can also be read from the Soft Front Panel interface,
but only after the hardware is installed.
Description of failure or service required.
4. Pack the module in its original ESD bag and packing carton. If the original carton is
not available, use bubble wrap or packing peanuts and place the instrument in a
sealed container and mark the container "FRAGILE".
5. On the shipping label, write ATTENTION REPAIR DEPARTMENT and the RMA num-
ber.
Step 2: Verify U1084A Shipment Contents
The following items are also included with your U1084A PCIe High-Speed Digitizer
order:
Part Number
Quantity
U1084A
M9210-90007
U1084-90002
10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
(worldwide contact information for repair and
If any correspondence is required, refer to the product by serial
number and model number.
Description
1
PCIe High-Speed Digitizer.
1
Keysight MD1 High-Speed Digitizer Software and Product Information
DVD
1
Startup Guide in hard copy.
Keysight U1084A Startup Guide
Advertisement
Table of Contents
