Water Heater Description; Standard Delivery; Special Accessories - STIEBEL ELTRON ACCELERA 300 Operating And Installation

INSTALLATION

WATER HEATER DESCRIPTION

9. Water heater description
4
3 2
1
1 High limit safety cut-out - manual reset
2 Compressor
3 Condensate drain
4 Filter dryer
5 Service valve, high pressure
6 Sacrificial anode
9
8
7 Capacitor
8 Fan
9 Evaporator
10 Defrost sensor
14 | ACCELERA® 300 HEAT PUMP WATER HEATER
5
6
10
7
The hot water thermostat temperature is preset at the
factory.
Where customers require a lower hot water
temperature, the thermostat settings of the heat pump
and the booster heater can be reduced.
A sacrificial anode rod is installed in the top of the water heater. (6)
9.1

Standard delivery

- Accelera 300 heat pump water heater
- Two adaptors, Union to ¾"
- Two union gaskets
- Condensate drain elbow
- Two copper crush caps
- 100 psi T&P valve
9.2

Special accessories

Description
Anode rod
Segmented anode rod
Part number
WWW.STIEBEL-ELTRON-USA.COM
278235
143498