Environment And Recycling - STIEBEL ELTRON ACCELERA 300 Operating And Installation

INSTALLATION
SPECIFICATION
Model
COP(t) (at 15 °C (59 °F) air temperature, 70% RH, water heat-up from 15 °C (59 °F) to
60 °C (140 °F), in accordance with EN 255 T3, 240 V / 60 Hz)
* Standard automotive R-12/R-134A manifold gauge set can be
used to test and fill refrigerant.
30 | ACCELERA® 300 HEAT PUMP WATER HEATER
The installation, electrical connection and first operati-
!
on of this appliance should be carried out by a qualified
installer.
The company does not accept liability for failure of any
!
goods supplied which have not been installed and ope-
rated in accordance with the manufacturer's instructions.

Environment and recycling

Please help us to protect the environment by disposing of the
packaging in accordance with the national regulations for waste
processing.
Accelera 300
WWW.STIEBEL-ELTRON-USA.COM
3.18