imagistics im9220 User Manual page 87

Advanced Information
2
Set copy conditions, as desired.
– All copy conditions except Reserve mode can be specified.
3
Position original(s), then press [Start] to start the interrupt copying.
4
When Interrupt copying is completed, press [Interrupt] again.
The [Interrupt] LED turns out and the Machine Status Screen will be
displayed.
5
Press [Start] to resume copying.
Note
To check settings for the previous job before restarting, touch [Close] on
the Machine Status Screen to display the Basic Screen.
Check the settings, then press [Start] to resume copying.
im9220
14
14-9