imagistics im9220 User Manual page 51

Finishing / Paper Fold
To set finishing mode
0 A machine with Finisher installed is set to collate output to the primary
(main) tray by default.
0 Setting copy conditions restricted to use Secondary (Sub) tray or Folding
mode tray will switch the tray selection automatically.
1
Touch [Finishing] on the Basic Screen.
The Finishing setting menu will be displayed.
2
Specify the output tray.
– Touch [Main Tray] or [Sub Tray] to highlight it.
3
Select Sort or Group, and set Offset to use offset output.
– To set Sort mode, touch [Sort] to highlight it.
– To set Group mode, touch [Group] to highlight it.
– To use Offset mode in combination with Sort or Group mode, touch
[Offset] to highlight it.
im9220
12
12-13