imagistics im9220 User Manual page 221

11
11.4 Locating Title Pages on the Front Side (Chapters)
This function is used with ADF in 1-2 mode for the purpose of locating title
pages on the front side, rather than reverse side, of a duplex copy to improve
the presentation of double-sided copies.
To effectively locate the title page on the front, a blank page will be automat-
ically created on the reverse side of a sheet, if required.
Single-sided originals
Note
Touch [Booklet] key on the Chapters Screen to use this function together
with Chapters.
Use Stamp together with this function to print chapter number onto
chapter page in addition to page number.
To set Chapters function
0 Use ADF to scan originals.
0 Max. title pages: 30 locations
0 Entering "0" or the same page number twice will be ignored on the
screen.
0 Chapter insertions occur in sequence even if original page numbers are
entered out of sequence.
0 The chapter page can be copied on the sheet from another tray source.
(Print Insertion)
11-14
Title pages
Applications
Copies in Chapters mode
Title pages
im9220