Table of Contents
Advertisement
3.2.2
Prepare cistern
Functional unit
Fig. 2: Dimensional drawing 8332.3
Cut the natural stone coverings according to the dimensional
drawing.
Take the tolerance and thickness of the covering into consideration.
Ensure that the plastic surfaces are clean, dry, and free of grease.
Apply Pactan adhesive cleaner 14 to the plastic surfaces to which
you will attach the stone coverings – do not apply to the stone!
If applied correctly, the adhesive cleaner leaves a thin film on the
plastic surface.
Use Pactan silicone adhesive 7043 to glue the natural stone cov-
ering into the recess of the flush plate.
Allow the adhesive to cure completely.
Place the functional unit onto the basic panel.
The following work stages and diagrams differ depending
on the cistern being used. The relevant steps are marked
accordingly.
Handling
10 from 15
Advertisement
Table of Contents
