Table of Contents
Advertisement
6. Use Cases
2. Press Play to start the playback
Note: The name and the current position of the played clip are displayed in the head display
3. Press the Pause button to stop and resume the playback
4. Press the Back and Next buttons to select other clips for playback
5. Press the Eject button to clear the show window
6.5
Remote control from external media controllers
About
The Remote Control feature provides an interface, that enables third party programmable, external media controllers to control
the IOSONO ONE via command lines over TCP/IP, TCP/UDP and COM/RS232 connections. How to change the Remote Control
settings with the Play Config software is explained in "Network Tab", page 19.
Each command is terminated by a byte having the value 0x0D (which corresponds to ASCII's CR signal).
Command message: <Command>0x0D
Example: PLAY0x0D
Command message with data:
Example: CUE Cliplist10x0D
You can find a list of remote control commands In the following table:
Name
AUTOPLAY ON
AUTOPLAY OFF
BACK
CHASE ON
CHASE OFF
CUE
EJECT
GOTO
LOOPON
LOOPOFF
MUTEON
MUTEOFF
PAUSE
PLAY
PRIOR
SETVOLUME
STATUS
STOP
26
<Command><Whitepsace><Data>0x0D
Arguments
Name: (Case sensitive) Name
of a clip list
Position: A timecide position
string (e.g. 00:01:05:13)
Function
If activated, the next cued clip
will follow the current playing
clip, the transition is seamless
ning of current clip
Turns timecode
synchronization on or off
Sets the clip list to be played
next, current played clip is pre-
served, everything after this
clip is removed and replaced
by the cued clip list, clip lists
consist of 1 or more clips
Clears all cued clips
Jumps to the given timecode
po- sition within the clip list
When on, the playback will
start with the first cued clip
after the last was finished
Mutes and unmutes the audio
output
Pauses playback, position is
pre- served
Starts playback when paused
or stopped, jumps to next clip
when playingnect
Sets playback position to
begin- ning of prior clip
Sets main volume
Returns the status byte
Stops playback, resets
position to first cued clip
R5906747 IOSONO ONE 16/05/2017
Comment
Playback will stop at clip end
and select the next clip when
deac- tivated, so play com-
mand will then start next clip
When stopped, back has no
effect
Will stop playback, re- moves
LOOP
Name of the clip list is case
sensitive
Will stop the playback
Will not be executed when
CHASE is ON
Will not be executed when
CHASE is ON
Will not be executed when
CHASE is ON
If no next clip exists, nothing
happens
If the currently played clip is
the first in the list, nothing will
hap- pen
Advertisement
Table of Contents
