Setup Procedure Before Starting Operation - Mitsubishi MELSEC-F FX3U Series User Manual

FX /FX Series PLC User's Manual - Analog Control Edition
3U 3UC
FX -4AD-ADP (4-channel analog Input)
3U
1.2

Setup Procedure Before Starting Operation

Before starting analog input using 4AD-ADP, follow the procedure below to set up the system:
Check of specifications
System configuration and selection
Changing of input characteristics
If the error status data or the input analog value is
abnormal, refer to Chapter 6 "Troubleshooting".
C-4
FX -4AD-ADP
3U
Refer to Chapter 1.
Outline
Refer to Chapter 2.
Refer to the
common pages.
Refer to Chapter 3.
Wiring
Refer to Chapter 4.
Programming
Refer to Chapter 5.
1.2 Setup Procedure Before Starting Operation
Outline of system:
• Version number of compatible PLC
• Version number of compatible programming tool
Specifications:
• Operation environment
• Performance specifications
• Input characteristics
System configuration:
(Refer to the common pages for analog control.)
• Selection of units
Wiring:
• Selection of sensor cable
• Power supply line
• Analog input line
Programming:
• Details of special devices
• Examples of basic programs
Method of input characteristics change:
• How to use scaling instruction
1 Outline