Flush; Flush Mixed Material - Graco XM Series Repair Parts

Plural-component sprayers

Hide thumbs Also See for XM Series:

Table of Contents

Enlarged version

Flush

Flush Mix Manifold

Use Solvent Pump

to turn off system. Follow Pressure

1. Press

Relief Procedure, page 13. Engage trigger lock.

Remove spray tip.

TI1949a

2. Close sampling valves (AE, AF) and mix manifold

valves (AH, AJ).

3. Open solvent shutoff valve (AK) at mix manifold.

313289V

4. Open solvent pump air control (CB). Pull out and

5. Disengage trigger lock. Hold a metal part of the gun

TI1948a

6. Engage trigger lock.

7. Close solvent pump air valve (CB) and solvent

8. Follow Pressure Relief Procedure, page 13.

9. Engage trigger lock.

10. Disassemble and clean spray tip with solvent by

slowly turn solvent pump air regulator (CG)

clockwise to increase air pressure. Use lowest

possible pressure.

firmly to a grounded metal pail with a splash guard

in place.Use a pail lid with a hole in it to dispense

through. Be careful to keep fingers away from the

front of the gun. Trigger gun until solvent appears.

shutoff valve (AK) at mix manifold.

hand. Reinstall on the gun.

Flush

Table of Contents