Overview
Overview
XM sprayers are not approved for use in hazardous
locations unless the base model, all accessories, all
kits, and all wiring meet local, state, and national
codes. See Models, page 10, to determine the
appropriate location for your particular model.
Before Repair
Location
XM sprayers are not approved for use in hazardous
locations unless the base model, all accessories, all
kits, and all wiring meet local, state, and national
codes. See Models, page 10, to determine the
appropriate location for your particular model.
Grounding
Connect ground wire clamp (FG) to a true earth ground.
If wall power is used to power controls or heaters,
ground electrical connection properly according to local
codes.
12
Proper Lifting of Sprayer
Follow instructions to avoid serious injury or damage
to equipment. Never lift with the hopper(s) filled.
Lift Using a Forklift
Power must be off. Sprayer can be raised and moved
using a forklift. Carefully lift the sprayer; make sure it
balances evenly.
Lift Using a Hoist
Sprayer can also be lifted and moved using a hoist.
Connect a bridle swing, hooking an end to each of the
air motor lift rings. Hook the center ring to a hoist
Carefully lift the sprayer; make sure it balances evenly.
2.0 ft. (0.61 m)
minimum
FG
313289V