Turn On/Turn Off The Power; Turn On The Power - Fujitsu XG0440DC Hardware Manual

XG0440DC/XG0440DCR Hardware Guide
2.7

Turn On/Turn Off the Power

The following describes the method for turning on and turning off the power of the switch.
Caution
• Please use the power cable included in this product. Also, please do NOT use this power cable
on other products.
• If the power outlet does not match with the power cable plug, please use the change plug
adapter.
As a safety measure to prevent electrical shocks, please make sure to connect the ground wire
of the change plug.
Precautions
• Please set the switch (product) to a place near the electrical outlet which the power cable will be connected and
secure a space for the power cable to be pulled off easily.
• Please connect a power cable to PSU1 first, then PSU2.
If power cables are not connected in this order, the CHECK LED will light orange. If the CHECK LED is lit, delete the
error log using the console command after turning on the power of the switch.
# clear logging error
#
Reference User's Guide "5.18.1.5 clear logging error", p. 372.
• When turning off the power. Please follow the above steps in an opposite order.
2.7.1

Turn on the Power

1. Connect the power cable to the electrical outlet.
2. Plug in the power cable to the power connecter of PSU1.
Power will turn on.
43
Chapter 2 Installation

Turn On/Turn Off the Power