Fujitsu XG0440DC Hardware Manual page 32

XG0440DC/XG0440DCR Hardware Guide
2. Slide the switch on to the rails in the rack, Secure the switch to the rack using two M6 screws at the
front of the rack.
The XG0440DC is mounted in a rack so that the port side of the switch is located at the front.
The XG0440DCR is mounted in a rack so that the power inlet side of the switch is located at the front.
M6 Machine Screws
Precautions
Devices mounted imediately atop and beneath the switch may block installation of the switch power cable. In that case,
plug the power cable into the switch before installing it in the rack.
M6 Machine Screws
32
Chapter 2 Installation
Installation of the switch