Satel MSP-300 Manual

Satel MSP-300 Manual

Wireless outdoor siren

Advertisement

MSP-300
WIRELESS OUTDOOR SIREN
The MSP-300 wireless siren provides information about alarm situations by means of optical and acoustic
signaling. The siren works with:
the PERFECTA 16-WRL and PERFECTA 32-WRL control panels,
the MTX-300 controller.
This manual applies to the siren with firmware version 1.01 (or newer).

1. Features

Two-way encrypted radio communication using 433 MHz band.
Acoustic signaling by means of piezoelectric transducer.
Optical signaling by means of LEDs.
Remote configuration.
Power supply from 3.6 V lithium thionyl chloride battery.
Battery status control.
Weatherproofed electronic circuit.
Tamper protection against cover removal and tearing enclosure from the wall.
High-impact polycarbonate enclosure, featuring a very high mechanical strength.

2. Specifications

Operating frequency band ...................................................................................................... 433.05 ÷ 434.79 MHz
Radio communication range (in open area) ...........................................................................................up to 400 m
Battery ..................................................................................................................................ER34615 3.6 V / 13 Ah
Battery life expectancy..........................................................................................................................up to 3 years
Standby current consumption........................................................................................................................ 0.6 mA
Maximum current consumption .................................................................................................................... 500 mA
Sound pressure level (at 1 m distance) ................................................................................................ up to 105 dB
Environmental class according to EN50130-5 .................................................................................................... IIIA
Operating temperature range ............................................................................................................-40C ...+55C
Maximum humidity..........................................................................................................................................93±3%
Dimensions ................................................................................................................................. 148 x 254 x 64 mm
Weight...............................................................................................................................................................820 g
Hereby, SATEL sp. z o.o., declares that this siren is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at
www.satel.eu/ce
msp-300_en 03/18

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MSP-300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Satel MSP-300

  • Page 1: Specifications

    Dimensions ..........................148 x 254 x 64 mm Weight................................820 g Hereby, SATEL sp. z o.o., declares that this siren is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at...
  • Page 2 MSP-300 SATEL 3. Description Explanations for Fig. 1: enclosure cover. enclosure base. battery cover. piezoelectric transducer. antenna. Never shorten or deform the antenna. tamper switch (tamper alarm triggered if open). battery connector. electronics module. cover locking screws.
  • Page 3 SATEL MSP-300 Enclosure base Explanations for Fig. 2: mounting hole. tamper mounting hole. Triggering the alarm signaling The alarm signaling is triggered:  on receiving a radio command from the control panel / controller;  on opening the tamper switch.
  • Page 4: Power Supply

    14. Connect the battery. 15. Replace the siren cover and fasten it with screws. 16. Test the siren for proper operation. SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND tel. + 48 58 320 94 00 www.satel.eu...

Table of Contents