Related Manuals for Advantech RIO-3302
Summary of Contents for Advantech RIO-3302
- Page 2 All other product names or trademarks are properties of their respective owners. The MIC-3036, developed by Advantech Co., Ltd., has passed the CE test for environment specifications when shielded cables are used for external wiring. We recommend the use of shielded cables.
- Page 3 Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
- Page 4 Before installation, ensure that the following materials have been received: • One RIO-3302 (or RIO-3302S) CompactPCI™ rear transition card • One warranty certificate • One startup Manual • One CD disc and manual (in PDF format) If any of these items are missing or damaged, contact your distributor or sales representative immediately.
-
Page 5: General Information
Contents 1. General Information ........1 1.1 Introduction ................. 2 1.2 Specification ................2 1.2.1 SCSI Function ................. 2 1.2.2 Standard functions ................2 1.2.3 Mechanical and environmental specifications ........ 3 1.3. Indicator and Connector Location ..........4 2. Hardware and drivers Installation ....7 2.1 Card installation ................ - Page 6 A.12 Hard Disk Drive Connector (CN11,CN13) ....... 23 A.13 Hard Disk Drive Connector (CN10) ......... 24...
- Page 7 Figures...
- Page 8 Tables...
- Page 10 The RIO-3302/RIO-3302S is a CompactPCI 6U-sized rear transi- tion board. It provides access to the rear panel for the I/O func- tion on Advantech’s CompactPCI CPU board. • Controller : Adaptec AIC-7892 • Bus : PCI 64-bit / 33Mhz • Channel : single SCSI channel •...
- Page 11 • EIDE interface: Two connectors for IDE channels(Primary and Secondary channels) • FDD interface: Supports one on-board slim-type floppy connector. • CompactFlash™ interface: Supports one on-board CompactFlash™ socket • Keyboard connector: One 6-pin mini-DIN connector on rear panel • Mouse connector: One 6-pin mini-DIN connector on rear panel •...
- Page 12 The RIO-3302/RIO-3302S provides jumpers and connectors for users specific applications.
- Page 13 Note: The CompactFlash interface (CN14) uses a primary IDE chan- nel. Users need to set it as master or slave via jumper JP1 when another device is connected on the primary IDE channel as...
- Page 15 The CompactPCI connectors are firm and rigid, and require careful handling while plugging and unplugging. Improper installation of a card can easily damage the backplane of the chassis. The system card can be installed only in the system slot. Do not insert the system card into the other slot, or insert a peripheral card into the system slot.
- Page 16 5. Left-pull the right handle and right-pull the left handle to push the card into place. 6. Secure the card by locking the handles into place. 1. Release the locking latches on the handles. 2. Push the both handles out to release the card from the backplane. 3.
- Page 17 Device drivers and utilitys for DOS, Windows2000/95/98/NT and SCO UNIX are included in the utility CD-ROM disc. The utility user's guide and installation instructions are provided in the utility CD-ROM disc. The instructions are located in the directory \RIO3302S\SCSI .
- Page 19 # indicates "low active".
- Page 20 # indicates "low active".
- Page 21 #: Low active Note: The RIO-3302 supports DMA/66 HDD.
- Page 29 # low active...
- Page 30 39 37 ..40 38 ..4 2 # low active...
- Page 31 # low active...
Need help?
Do you have a question about the RIO-3302 and is the answer not in the manual?
Questions and answers