Foot Control Information And Operation; Operation For Air Polishing Procedures - DENTSPLY Cavitron PROPHY-JET Directions For Use Manual

1. AC Power Cord Set
2. Cavitron ® JET Air Polishing Insert #63740
Air Polishing Insert
Nozzle: Tube-in-a-tube
design delivers precise air/
water/powder
mixture at point
of delivery.
Lubricate the rubber O-ring on the insert with water before placing it into the handpiece. Place the insert rod into the insert port of the
handpiece. Align the powder delivery tube with the powder delivery port and gently push into handpiece until fully seated.
6.4 Foot Control Information & Operation
The Foot Control is a two-position momentary switch, which acti-
insert tip.

6.5 Operation for Air Polishing Procedures

Foot control
released.
Bleed air exits
insert nozzle tip.
Prophy Powder Delivery Tube:
Directsair/powder flow to insert tip.
O-Ring:
Seals water when Insert Nozzle is fully seated in
Handpiece. O-ring should be replaced when worn.
Foot control
depressed
half way.
Lavage flow
(rinsing function)
is activated.
Section 6: Cavitron ™ PROPHY-JET ® cont'd
vates both lavage and powder flow and air polishing at the
Foot control
depressed
all the way.
Air Polishing
Function is
activated.
Insert Rod
ENGLISH
•
7