DENTSPLY Cavitron PROPHY-JET Directions For Use Manual page 6

5.5 Unpacking the System
Carefully unpack your Cavitron
Air Polishing Prophylaxis System and verify that all
components and accessories are included:
PROPHY-JET ® Air Polishing Prophylaxis
1. Cavitron ™
System with water supply line with filter, air supply line
with filter, handpiece and cable connector assembly
factory installed.
2. Air Filter Assembly
3. Detachable AC Power Cord set.
4. Cavitron ® JET Air Polishing Insert with cleaning tool.
5. Dual position Foot Control Assembly.
6. JetShield ™ Aerosol Reduction Device.
7. Literature Packet.
8. PROPHY-JET Prophy Powder
9. JET-Fresh Prophy Powder
5.6 Power Cord/Power Connection
• Verify the Power Control ON/OFF rocker switch located
at the left front underside of the System is set to the OFF
position before proceeding.
• Plug the detachable AC cord into the back
of the System.
• Plug the 3 prong grounded plug into an approved outlet.
ON/OFF rocker switch
PROPHY-JET ®
™
Section 5: Installation Instructions con'd
5.7 Foot Control Cable
Assembly Connection
Align the Foot Control plug with the receptacle on the
back of the System and push it in until firmly seated.
5.8 Incoming Water Supply
Line Connection
• Connect the free end of the system's water supply line
to office water supply line or a Cavitron
Dispensing System.
• Inspect all connections to make certain there
are no leaks.
5.9 Air Supply Line Connection
• Connect the free end of the system's air supply line
to office air supply line or a Cavitron
dispensing System.
• Inspect all connections to make certain there
are no leaks.
®
DualSelect ™
DualSelect
™ ™
•
ENGLISH 5