Speco & IP-WDRB1 User Manual page 46

Speco Technologies
'Downloading' message will be shown until completion of Update as [4-24] (it may take time
according to Network situation). Upon completion of upgrade, there appears message showing
upgrade result.
[4-25] is the message showing that upgrade has been correctly done. Click 'Restart' in
'System Restart' to restart System of THE CAMERA.
If [4-26] is displayed as below, this means that THE CAMERA has been upgraded to the
latest Version, there is no need to update any more.
If user found [4-27], there is a error in connection to Upgrade Server, re-check Internet
Connection or re-check DNS Server Address in
Fig. 4―24 Firmware Download
Fig. 4―25 Completion of Upgrade
Fig. 4―26 Check of Upgrade Version
46
'3. Basic Setting' and try to upgrade again. If
IP Camera User's Manual