Speco & IP-WDRB1 User Manual page 100

Speco Technologies
After finding IP, double-click IP of THE CAMERA to go to the editable Mode as follows.
Input new IP Address, Default Gateway, Subnet Mask, and then input Password of THE CAMERA
Administrator and click 'IP Change', to set up new IP of THE CAMERA. Upon completion of setting,
find new IP and click 'Ping' to check whether setting is done, and close the program by clicking
'End' button.
Fig. 5―4 IP Check
Fig. 5―5 IP Check
100
IP Camera User's Manual