Operating Camera Osd Menu (Intensifier Cameras) - Speco & IP-WDRB1 User Manual

Speco Technologies
5.2.3.

Operating Camera OSD Menu (Intensifier Cameras)

1. Press the SET button to access the SETUP mode.
SET UP menu is displayed on the monitor screen.
2. Select the desired feature using the UP or DOWN button.
Each time you press the UP or DOWN button, the arrow
indicator moves up or down.
Move the arrow indicator to the desired feature item.
3. Change the status of the selected feature using the LEFT or
RIGHT button.
If you press RIGHT or LEFT button, it appears available status.
Press the button when gets desired feature.
4. When completed, move the arrow indicator to EXIT" and press
the SET button.
You can access submenu using SET button.
For the mode with '---', you may not access submenu.
57
IP Camera User's Manual