Table of Contents
Advertisement
Speco Technologies
Current Users
Recording@PC
Event& Alarm
Video Output
Dimension
Power Source
PHYSICAL
Power Consumption (Max.)
Operational Temperature
Weight
Video Out
RS485 Interface
Sensor In/Relay Out
CONNECTIVITY
Ethernet Jack
Protocols
Browser
Operating System
REQUIREMENTS
Processor
Memory
Appendix C To solve problem
C-1 Basic Check-point
C-1-1 Booting
Check if power plug is connected correctly.
C-1-2 Network cable (LAN cable) and cable connection check
Check if network cable is straight LAN cable. Hold each end of both side and check if
same color's cable is connected to same location in RJ-45 jack or not.
Check if network cable connects correctly with THE CAMERA.
Check if network cable connects correctly with Hub, IP sharing device and cable modem
etc....
*. If you found a problem in the product, first check with "C-1 Basic check point" and solve the
problem as following procedures:
C-2 Troubleshooting by type
C-2-1 Cannot connect with network
Interface
Manual
Schedule
Motion Detection
Sensor event
Sensor Trigger/Motion Detection
Alarm Notification
125
IP Camera User's Manual
10/100Mbps
20
Yes
Yes
Yes
Yes
Yes
SMS/E-MAIL/Alarm Sound(Option)
0'C ~ 50'C
1.7Kg
1
1/1
2/2
RJ45(10Base-T/100Base-TX)
HTTP, FTP, SMTP, TCP, IP, DHCP,
ICMP, NTP, DNS, DDNS
Internet Explorer
®
Windows
2000/XP
®
®
Intel
Pentium
Ⅲ1GHz+ (P4 2.4Ghz+ recommended)
256MB+ (512MB+ recommended)
®
Ver. 6.0+
Advertisement
Table of Contents
