Many parameters are accessed via the online menus in PDM, see "Parameters accessed via
drop-down menus" for the others.
1. Launch SIMATIC PDM, connect to the appropriate device and upload data.
2. Adjust parameter values in the parameter value field then click on "Enter". The status fields
read "Changed".
3. Open the "Device" menu, click on "Download to device", then use "File – Save" to save
settings offline. The status fields are cleared.
Figure 3-16
3.11
Parameters accessed via drop-down menus
Click on "Device" or "View" to open the associated drop-down menus.
FCT030 HART (From firmware 4.0)
Function Manual, 06/2018, A5E39931617-AB
Changing parameter settings using SIMATIC PDM
3.11 Parameters accessed via drop-down menus
Commissioning
29