1. Remove cap and ferrule from cable gland and slide onto cable.
2. Push cable through open gland and cable path.
3. Restore ferrule and tighten cap to lightly hold cable in place.
4. Signal cable screen is folded back over outer sheath and grounded beneath cable clamp.
5. Connect wires to terminals using wiring tool, field mount transmitter
FCT030 HART (From firmware 4.0)
Function Manual, 06/2018, A5E39931617-AB
5
4
Active current output
⑤
C
④
Ca+
Functional Earth
Active current output
Cp-
C
Ca+
+
-
Passive current output
U
0
HART Communication Interface
2.2 Connecting the Current HART, CH1
6
5
Passive current output
⑥
Cp-
⑤
C
Functional Earth
Cp-
C
Ca+
+
-
11