Zenith HydroTap G4 Series User Manual page 8

To dispense Boiling water:
HydroTap Classic:
Depress the Red lever, while simultaneously covering the safety lock button
with a second finger. These two actions need to occur simultaneously within
2 seconds for the successful dispensing of boiling water.
Elite Tap:
Place one finger on the safety lock, then touch the boiling button with a
second finger while keeping both fingers in position.
These two actions need to occur simultaneously within 2 seconds for the
successful dispensing of boiling water.
HydroTap Arc/Cube and Celsius AIO:
Gently tap the select button until the indicator light turns RED. Then tap the
safety button twice until the RED light flashes (This will flash for approx 2
seconds). Boiling water may be dispensed by rotating the control while the
RED light is flashing.
To dispense Boiling water:
HydroTap Classic:
Depressing the Red lever allows the dispensing of boiling water.
Pulling forward the Red lever allows the tap to operate in a "no-touch" mode.
Water will flow from between 5 and 15 seconds (This is user adjustable).
To reset, return the handle to the "Off" position and repeat the step. The lever
has to be manually returned to the "Off" position.
Elite Tap:
Touching the boiling button allows the dispensing of boiling water.
HydroTap Arc/Cube and Celsius AIO:
Gently tap the select button until the indicator light turns RED.
Rotating the control , when the indicator light is RED, allows the dispensing of
boiling water.
Page 8 of 28
Tap operation
(WITH SAFETY ON)
(WITH SAFETY OFF)
802254NZ - HT BC User Guide 10.18 v3.02