Zenith HydroTap G4 Series User Manual page 16

LCD Screen operation - Section C
4. - Booster
This function should only be considered when a Booster unit is installed.
Boiling Chilled
Note:
Failing to make the correct selection for 'Booster' will affect product
performance.
6. - Lux Sensor Calibration
Boiling Chilled
Page 16 of 28
1. Press the [MENU] button for main
menu.
2. Press the [Install] button.
3. Press the [Booster] button.
4. If a Booster is installed, select YES to
enable the Booster.
5. If no Booster is installed, select NO.
1. Press [MENU] for main menu.
2. Press [Install] .
3. Press [Lux Sensor Calibra-
tion]
4. The lights on the Tap head will flash
to confirm calibration.
5. Check for correct tap operation by
selecting 'Lux Sensor → OFF'.
When the room is darkened (below
the calibrated light level), the tap
lights will turn OFF after approx 30
seconds.
802254NZ - HT BC User Guide 10.18 v3.02