Zenith HydroTap G4 Series User Manual page 18

LCD Screen operation - Section D
D
This section is reserved for service technicians only
Note
: In New Zealand call a licensed electrician, plumber, or Zenith free call
on 0800 558 055, for assistance, service, spare parts, or enquiries.
LCD Screen operation - Section E
E Security
The Zenith HydroTap G4 allows the appliance coordinator to set up a pass-
word to protect against users changing the preferred system settings.
LCD Screen operation - Section F
F Communication - WiFi
This section allows the user to use WiFi to monitor the product remotely.
Follow the set up instructions supplied with the WiFi unit (sold separately).
Page 18 of 28
Service
To set a password
1. Press [MENU] button for main
menu.
2. Press [Security] button.
3. Press [Enable Password}
4. Enter a 4 digit password
To change a password
1. Press [MENU] button for main
menu.
2. Press [Security] button.
3. Press [Change Password}
4. Enter your old 4 digit password
5. Then enter your new 4 digit
password. You will need to
enter your password to access
the settings screen. If you have
forgotten the password, please
disconnect the power and restart
your HydroTap unit.
(Select models)
802254NZ - HT BC User Guide 10.18 v3.02