Zenith HydroTap G4 Series User Manual page 20

LCD Screen operation - Section G
Filter
Zenith HydroTap G4 allows the user to adjust filter life and edit filter usage.
Boiling Chilled
Boiling Chilled
Page 20 of 28
Note: The filter life may be set as a
function of Litres used, or in months
from the filter change. When the first of
these functions is reached (i.e. Litres or
months expired), the filter warning light
will be illuminated on the tap.
Either of these functions may be
disabled (See below).
To edit the filter life:
1. Press [MENU] button for main
menu.
2. Press [Setting] button.
3. Press [Filter] button.
4. Press [Filter Life] button, for Internal
or External filter.
5. To change filter life, first select filter
life (Litres) or filter life (Months),
then adjust using the up or down
arrows.
Note: Filter Life increases in 500
litre increments to a maximum of
10000 litres. Factory set at 4000
litres (Residential) or 6000 litres
(Commercial).
If the filter counter is accidentally reset,
it can be edited here.
1. Press the [MENU] button for main
menu.
2. Press the [Setting] button.
3. Press the [Filter] button.
4. Press the [Edit Filter] button for
Internal or External filter.
5. To edit, select Edit Usage(Litres) or
Edit Usage (Months), then adjust
using the up or down arrows.
6. Press [HOME] to return to the
Home screen.
802254NZ - HT BC User Guide 10.18 v3.02