Zenith HydroTap G4 Series User Manual page 6

HydroTap Arc/Cube and Celsius AIO:
Tapping the select button will
allow the choice of Boiling (RED)
with safety, Chilled (BLUE) or
Sparkling (WHITE) water mode.
The Arc/Cube control may be
rotated in a forward or reverse
direction to dispense Boiling or
Chilled water.
The rotary control is spring load-
ed in the anticlockwise direction
and when released, will return to
the OFF position. When rotated
clockwise the tap operates in a
"Pot fill" mode. Water will flow
from between 5 and 15 seconds
(this is user adjustable). To reset,
return the handle to the "Off"
position and repeat the step. The
lever has to be manually returned
to the "Off" position.
After activating the Boiling mode, all the lights will flash for 2 seconds, during
which time you may dispense water. When the rotary control is returned to the
Off position the light will continue to flash for an additional 3 seconds, allowing
you to dispense more water.
The control light will automatically default to the Chilled (BLUE) mode after 30
seconds of inactivity.
Mixer Tap:
Lifting the handle up will
decrease the flow rate and
lowering the handle will increase
the flow rate. Raise the handle
all the way up to turn the tap off.
When the handle is moved
towards the BLUE mark, the
temperature is decreased
and when moved towards the
RED mark, the temperature is
increased. The final temperature
will depend on the temperature
of the incoming cold water.
Page 6 of 28
Tap functions
Rotary control
Select Button
Safety Lock
802254NZ - HT BC User Guide 10.18 v3.02