Operating Instructions - German pool RHS 6328 User Manual

Chimney type range hood
Table of Contents

Advertisement

Operation Instructions
Important
1. The exhaust duct must be exposed outdoors.
2. There should be adequate ventilation in the room when a gas cooking range or other fuels are in use
for cooking.
3. The air from the range hood must not be discharged into a venting pipe that is used for exhausting
fumes from appliances burning gas or other fuels.
4. Ensure the electrical rating shown on the rating plate corresponds with the power supply in your
house before switching on the power supply.
Control Panel
Infrared-sense auto start
LCD window
Bright adjust
LED light
Main Power Switch
Speed adjust
Fan speed & Heater
P.8
Operation Instructions
I. Main Power Switch
- When it is switched to ON, the range hood is connected with power and at stand-by status. All func-
tions can be activated.
- When it is switched to OFF, all functions including Heat-Activated auto start, Heater oil removing and
Infrared sensor auto start cannot be activated. To activate any functions, it must be switched to ON.
II. Press button / LCD Window
-
Under stand-by status, the red light below the LCD window is always ON.
A. Speed
- Under stand-by status, Press the speed button(Right) to select the fan speed.
-The fan speed remains at the last step, please keep on pressing to the desired speed.
Right side of LCD window indicates H- Hight speed.
H
Right side of LCD window indicates M- Medium speed.
M
Right side of LCD window indicates L- Low speed.
L
-Long press for 2 seconds display window indicates AH, will activate Heat oil removing for 600 seconds,
press the speed button again to stop fan speed.
B. LED Light
- Under stand-by status, Press the LED button (Left) to select the LED brightness, the brightness of LED
remains at the last step, please keep on pressing to the desired brightness.
Left side of LCD window indicates 1-Low brightness
1
Left side of LCD window indicates 2-Medium brightness
2
Left side of LCD window indicates 3-High brightness
3
• Press the button for 2 seconds (keep sound will be heard) to turn off the LED light.
P.9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents