Table of Contents
Advertisement
3.4.2
Producing a house service connection
Geopress tapping valve
Requirements:
The protective foil is removed from the outlet sleeve.
n
▶
Push the connecting piece as far as it will go into the outlet sleeve.
▶
Place the clamping ring around the connecting piece and mount the
fixing bolt.
▶
Mount the house service connection in accordance with the instruc‐
tions of the Geopress K system.
▶
Perform a leakage test, see
on page 22.
Ä Chapter 3.4.6 'Leakage test'
Handling
19
Advertisement
Table of Contents
