3.3
Commissioning
3.3.1
Establishing a connection with mobile end devices
Multiplex Trio E-WLAN module
Plug the connection cable of the WLAN module into the
slot.
Lay the display cable in the cable conduit below the battery.
Replace the casing cover and use the Phillips-tip screwdriver to
tighten the two screws.
There are two ways to connect the Multiplex Trio E fitting with its mobile
end devices.
n
Peer-to-peer connection
via the router in the home network (Internet connection required)
n
We recommend to use a direct connection only during the initial installa-
tion. For daily use, the integration of the Multiplex Trio E fitting into the
home network is more comfortable. To use this variant, you will addi-
tionally need a free-of-charge user account with Viega.
Handling
„Display"
11 from 15