Table of Contents
Advertisement
2.3
Product description
2.3.1
Overview
2.3.2
Press connection with SC-Contur
Easytop circulation regulation valve, static regulation valve with SC-Contur
According to the applicable regulations, Easytop system fittings can be
used for all types of potable water and are DVGW certified, see
ulations from section: Product description" on page 7. Their plastic
components comply with the KTW recommendation and the require‐
ments pursuant to the applicable regulations.
The model is equipped as follows:
valve casing made of gunmetal/silicon bronze
n
valve top made of gunmetal/silicon bronze
n
dual-sided press connection with SC-Contur
n
drain plugs for drainage valve G ¼
n
setting scale
n
handwheel with exchangeable coloured plastic cap as media label‐
n
ling
key surface on the casing
n
The static circulation regulation valve can be used to equalise and shut-
off pipe sections. The set flowthrough volume can be fixed mechani‐
cally. The set value is not altered by opening and closing the valve.
The model is available in the following dimensions:
d
15
DN
15
Fig. 1: Press connection using a press connector as an example
The press connection has a circumferential bead in which the sealing
element lies. The connector is deformed upstream and downstream of
the bead and permanently connected to the pipe during pressing. The
sealing element is not deformed during pressing.
18
22
15
20
Product information
Ä „Reg‐
28
25
9 from 25
Advertisement
Table of Contents
