Rear Fender Rain Rail (Partial Cutting) Installation[Panel Replacement] - Mazda MX-5 2007 Bodyshop Manual

REAR FENDER RAIN RAIL (PARTIAL CUTTING) INSTALLATION[PANEL REPLACEMENT]

1. When joining and cutting the new and existing parts, trial fit the new part in position, then measure and adjust
the body as necessary to conform with standard dimensions.
2. Drill holes for plug welds before installing new parts.
3. After temporarily installing new parts, make sure the related parts fit properly.
CUT-AND-JOIN LOCATION
End Of Sie
09-80B–68
BODY STRUCTURE [PANEL REPLACEMENT]
55mm
{2.17in}
REAR FENDER RAIN RAIL
1
REAR FENDER GUSSET
4
4
id098008610700
5
CORNER PLATE
amxuub0000000