Raising The Windshield - Jeep Gladiator 2020 Owner's Manual

Cleaning Instructions
During windshield down applications, dust/dirt can accu-
mulate in the cover and block the camera lens. Use a micro-
fiber cloth to clean the camera lens, module, and inside
cover, being careful not to damage or scratch the module.

Raising The Windshield

1. Release the strap that secured the windshield in the
lowered position.
2. Raise the windshield.
3. Using the provided #T40 Torx head driver, reinstall the
four Torx head fasteners located along the interior of the
windshield. Secure them until they are snug, being
careful not to cross-thread the fasteners or overtighten.
GETTING TO KNOW YOUR VEHICLE
Interior Torx Head Fastener Locations
4. Reinstall the windshield wiper arms using the provided
15 mm socket. First, align the tips of the blade to the "T"
mark in the glass. Then, while holding the arm in that
position, reinstall the hex nut and tighten until snug. Be
careful not to overtighten. Repeat for the other arm.
129
2