Jeep Gladiator 2020 Owner's Manual page 275

Frequently Asked Questions About Installing Child Restraints With Seat Belts
What is the weight limit (child's weight
+ weight of the child restraint) for using
the Tether Anchor with the seat belt to
attach a forward facing child restraint?
Can the rear-facing child restraint touch
the back of the front passenger seat?
Can the rear head restraints
removed?
Can the buckle stalk be twisted to
tighten the seat belt against the belt path
of the child restraint?
Weight limit of the Child Restraint
Yes
be
Yes
No
Always use the tether anchor when
using the seat belt to install a forward
facing child restraint,
recommended weight limit of the child
restraint.
Contact between the front passenger
seat and the child restraint is allowed, if
the child restraint manufacturer also
allows contact.
The center head restraint can be
removed if it interferes with the
installation of the child restraint.
See "Head Restraints" in "Getting To
Know Your Vehicle"
information.
Do not twist the buckle stalk in a
seating position with an ALR retractor.
SAFETY 273
up to the
4
for further