Huawei SUN2000-50KTL-JPM0 User Manual page 93

SUN2000-(50KTL-JPM0, 50KTL-JPM1, 63KTL-JPM0)
User Manual
No. Parameter
10 Power factor
Reactive
11
power
compensation
(Q/S)
12 Enable
reactive
power
parameters at
night
13 Reactivepowe
rcompensatio
natnight
(kVar)
Overfrequenc
14
y derating
15 Trigger
frequency of
over
frequency
derating
Issue 01 (2018-09-30)
Description
Adjusts the SUN2000
power factor.
Adjusts the SUN2000
output reactive power.
Enable nighttime reactive
power parameters.
If Reactive power output
at night and Enable
reactive power
parameters at night are
set to Enable, when there
is no PV input and remote
scheduling instruction,
this command is
responded.
If this parameter is
enabled, the active power
of the inverter will be
derated according to a
certain slope when the
grid frequency exceeds
the value that triggers
overfrequency derating.
The standards of certain
countries and regions
require that the output
active power of the
SUN2000 be derated
when the grid frequency
exceeds a certain value.
Copyright © Huawei Technologies Co., Ltd.
Unit Value Range
N/A (–1.000,
–0.800]U[0.800,
1.000]
N/A (-1, 1]
N/A  Disable
 Enable
N/A (-33.3, 33.3]

N/A Disable
 Enable
Hz  When the output
frequency is 50
Hz, the value
range is
45.00–55.00 Hz.

When the output
frequency is 60
Hz, the value
range is
55.00–65.00 Hz.
7 Man-Machine Interactions
Remarks
N/A
N/A
This parameter is
configurable only
when Reactive
power output at
night is set to
Enable.
N/A
N/A
N/A
87