Huawei SUN2000-50KTL-JPM0 User Manual page 81

SUN2000-(50KTL-JPM0, 50KTL-JPM1, 63KTL-JPM0)
User Manual
No. Parameter Description
12 String Specifies the
connection connection mode of
mode PV strings.


13 Communic The standards of
ation certain countries and
interrupt regions require that
shutdown the SUN2000 must
shut down after the
communication is
interrupted for a
certain time.
Issue 01 (2018-09-30)
Unit
N/A
When the PV
strings connect to
the inverter
separately (fully
separate
connection), there
is no need to set
this parameter.
The inverter can
automatically
detect the
connection mode
of the PV strings.
When the PV
strings connect to
one another in
parallel outside the
inverter and then
connect to the
inverter
independently
(fully parallel
connection), set
this parameter to
All PV strings
connected.
N/A
Copyright © Huawei Technologies Co., Ltd.
Default Value Range
Value
Automatic  Automatic
detection detection

All PV
strings
separated
 All PV
strings
connected
Disable  Disable
 Enable
7 Man-Machine Interactions
Remarks
N/A
If Communication
interrupt shutdown
is set to Enable and
the SUN2000
communication has
been interrupted for
a specified time (set
by Communication
interruption
duration), the
SUN2000 will
automatically shut
down.
75