Huawei SUN2000-50KTL-JPM0 User Manual page 80

SUN2000-(50KTL-JPM0, 50KTL-JPM1, 63KTL-JPM0)
User Manual
No. Parameter Description
8 Crystalline The PID effect may
silicon PV result in the power
compensati attenuation of PV
on mode modules, which is
mainly caused by the
DC voltage between
PV modules and the
ground. Enabling this
setting lowers the DC
voltage between PV
modules and the
ground by reducing
the impedance on the
input side to the
ground.
9 Built-in Specifies the
PID operation mode of the
running SUN2000 built-in
mode PID.
10 PID Specifies whether to
nighttime enable the PID
off-grid nighttime off-grid
repair repair.
PID Specifies whether to
11
daytime enable the PID
off-grid daytime off-grid
repair repair.
Issue 01 (2018-09-30)
Unit Default
Value
N/A Disable
output
N/A Repair
N/A Enable
N/A Disable
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Value Range Remarks
 Disable This parameter is
output displayed only if PV
module type is set

PV– positive
to Crystalline
offset
silicon.
 PV+
negative
offset
 Disable This parameter is
displayed only for
 Repair
the models that
support Built-in
PID repair.
 Disable This parameter is
displayed only if

Enable
Built-in PID
running mode is set
to Repair.
 This parameter is
Disable
displayed only if
 Enable
Built-in PID
running mode is set
to Repair.
74