SUN2000-(50KTL-JPM0, 50KTL-JPM1, 63KTL-JPM0)
User Manual
7.2 Operations with the SUN2000 App
When you use the SUN2000 app to set parameters for the SUN2000, setting items on certain
parameter setting screens are not displayed if the AC switch between the SUN2000 and the
power grid is turned on but both of DC SWITCH on the SUN2000 are not in the ON position.
Switch both of DC SWITCH to the ON position and then reset relevant parameters again.
7.2.1 Operations Related to the Advanced User
If you log in to the app as Advanced User, you can set grid parameters, protection parameters,
and feature parameters for the SUN2000.
7.2.1.1 Setting Grid Parameters
Procedure
Step 1 Tap Function Menu > Settings > Grid Parameters to access the parameters setting screen.
Figure 7-2 Grid parameters (advanced user)
----End
Parameter List
No.
Parameter
1
Grid code
Issue 01 (2018-09-30)
The app screenshots in this chapter are for the SUN2000-50KTL-JPM0. The app version is
2.2.00.031.
Configurable parameters vary depending on the grid code. The actual display prevails.
The parameter names, value ranges, and default values are subject to change. The actual display
prevails.
Description
Set this parameter based on the
grid code of the country or
region where the SUN2000 is
used and the SUN2000
application scenario.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Default Value
Value Range
Japan
N/A
standard(MV440
–60Hz)
68