Configuring The Voyager Multi; Factory Default Ip Address; Factory Fw Version - Honeywell Tema-Voyager Multi VMC Series Installation Manual

Configuring the Voyager Multi

Factory default IP Address

A device from factory is configured with this default IP address:
160.221.230.127
After the first connection, the IP address must be changed because, to
avoid conflicts, every device in the network must have a different
address.
To change the IP address please refers to:
EBI - Temaline Access Control Configuration Guide
Configuring the Voyager Device

Factory FW version

A device is shipped from factory with a running version of the FW
application corresponding to the most recent version, available at the
manufacturing time, of the released FW.
The installed version may not be suitable for your plant or a more
recent version of the FW could be available.
You should verify the FW version installed on your device and check
the Temaline compatibility tables distributed on the EBI Global
Support site.
To verify the FW application version running on the device and to
update the FW version please refers to:
Tema-Voyager Multi - Web Interface Guide
57