Technical Specifications - Honeywell Tema-Voyager Multi VMC Series Installation Manual

TECHNICAL SPECIFICATIONS

Parameter
DC power supply
POE power supply
POE+ power supply
Power consumption
Available current
readers and
(supported only
VMA-06, VMA-07 plug-in)
Inputs
Outputs
Input/Output lines
Microprocessor
Flash Memory
SDRAM memory
Real Time Clock
LAN Ethernet connection
RS485 connection
Wiegand connection
Size
Weight
(including carton box)
Case
Value
10-30VDC (for UL60950 compliance units must be supplied by a
separately certified NEC Class 2 (LPS) power unit)
POE IEEE 802.3af-2003
POE+ IEEE 802.3at-2009
4,8 W Board only
DC power supply: max 36 W
POE+: max 25.5W
POE: max 15.4W
for DC power supply: max 1500mA @ 12Vcc
locks
POE+ : max 1500mA @ 12Vcc
with
POE : max 750mA @ 12Vcc
WARNING: check limits with Tema-Voyager Multi Consumption
Verifier tool
4 fixed:
Supervised inputs with four statuses: Normal, Alarm, Cut, and Short
or two statuses: Open, Close.
Current: 0~10mA for each input
Voltage: +14V maximum; 0V minimum
Min detection time: 50ms
4 fixed:
From the main Board: Power Open Drain (Mosfet) 12V-50mA
From the optional Relay Output board: dry contact NO/NC 24V-3A
8 configurable (same characteristics of the fixed input/output)
Freescale i.MX 6 SOLO 800 Mhz
Operative system LINUX
High reliability NOR Flash 128 Mbytes
High performance DDR SDRAM 512 Mbytes
Internal RTC; retention time 48 hours using super capacitor.
10Mb/100Mb/1Gb BaseT standard unshielded cable on RJ45;
POE, POE+
4 lines (OSDP protocol), alternative to the 4 Wiegand lines
4 monitored lines, alternative to the 4 RS485 lines
240*140*60mm
550g
PC+ABS UL V0 Thickness: 2.5mm
Not painted; Color: Grey RAL 7035
69