Led - Honeywell Tema-Voyager Multi VMC Series Installation Manual

LED

The below table lists the led and explain their meaning.
62
See Appendix 1 for details.
SW1.5 Application Switches: Spare
SW1.6 Application Switches: Manufacturing test.
DO NOT USE: This feature is used for factory test.
See Appendix 1 for details.
SW3.1 RS485 (Reader 1) termination resistor, Data A.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW3.2 RS485 (Reader 1) termination resistor, Data B.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW4.1 RS485 (Reader 2) termination resistor, Data A.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW4.2 RS485 (Reader 2) termination resistor, Data B.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW5.1 RS485 (Reader 3) termination resistor, Data A.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW5.2 RS485 (Reader 3) termination resistor, Data B.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW6.1 RS485 (Reader 4) termination resistor, Data A.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW6.2 RS485 (Reader 4) termination resistor, Data B.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW7 System reset
LED Function
CR18 Ethernet 10/100M bit/s Green
CR25 Database status, Red
Table 8 - Switches
Values
ON= Ethernet working at
10/100M bit/s
OFF=Ethernet not working at
10/100M bit/s
ON=Database not present
OFF= Database present
-
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open