Introduction; Purpose Of This Manual; Device Overview - Honeywell Tema-Voyager Multi VMC Series Installation Manual

INTRODUCTION

Purpose of this manual

This manual details how to install the Tema-Voyager™ Multi (from
now on it will be simply called: Multi).
Details on operating instruction, plant maintenance and
troubleshooting are also provided.

Device overview

Multi acts as a controller in Temaline architecture.
Multi manages applications included: Access Control,
Time&Attendance, Canteen and light Intrusion detection.
It has the capability to manage up to 4 third party readers.
The readers can be connected to the device through standard
Wiegand lines or RS485 lines and OSDP protocol.
The usage of OSDP protocol with secure channel makes the solution
more secure in respect to the one using Wiegand connection.
Doors can be managed with reader on one side and REX button on
the other, or with readers on both sides of the door.
The actual number of the readers managed by your device is based
on the product you purchased (see: Contents of the box - Multi device).
Multi has on board digital I/O used for the management of the
Wiegand reader (buzzer, green/red led, reader tamper) and also 4
inputs (that can be set to be supervised or digital), 4 open drain
outputs and 8 I/O lines can be freely configured as inputs or outputs.
These I/O can be used both for the management of the doors and for
light Intrusion detection purpose.
Two different types of relays boards are available, as options, for the
Multi device. Each relay board can manage up to 4 outputs 24V @3A.
Up to 3 relay output boards can be connected to the Multi (See:
USING RELAYS PLUGS-IN (VMA-06, VMA-07))
9