Honeywell Tema-Voyager Multi VMC Series Installation Manual page 46

46
2. Switch off the Multi device.
3. Unscrew the cover of the Voyager Multi case and remove it.
4. Plug the VMA-0x devices on the Multi board.
Figure 17 - Plugging the VMA-06 on position 1
Caution:
The plugin has two connectors, one with 8 pins and
another with 6 pins, this has to be matched with the
socket on the main board
5. Set the jumpers required to configure the use of the plug-in
(see for details: Configuration of Multi to use VMA-06 and VMA-
07 plugs-in on page 48)
6. Wire the outputs as specified in the following of the chapter.
Figure 16 - Plugs-in position