Advertisement
Quick Links
Specifications:
Construction:
Dimensions:
Weight:
Battery:
Operation:
Flash Capacity:
Compatible housings:
Compatible strobes:
Identification of Parts:
Triggering LEDs
On/Off switch
Hotshoe Connector
Body: PC+ABS
Approx. 52 x 36 x 26.5mm
Approx. 39g (w/ batteries installed)
Panasonic CR2450 x2pcs
This a manual flash trigger only and has no
TTL function.
Approx. 5000times
NA-A7
INON: Z240 type 4, D2000 type 4, S2000
Sea&Sea: YS-250, YS-D1, YS-01
1
Batteries compartment cover
Indicator
Advertisement
Related Manuals for Nauticam 26302
Summary of Contents for Nauticam 26302
- Page 1 Specifications: Construction: Body: PC+ABS Dimensions: Approx. 52 x 36 x 26.5mm Weight: Approx. 39g (w/ batteries installed) Battery: Panasonic CR2450 x2pcs This a manual flash trigger only and has no Operation: TTL function. Flash Capacity: Approx. 5000times Compatible housings: NA-A7 INON: Z240 type 4, D2000 type 4, S2000 Compatible strobes: Sea&Sea: YS-250, YS-D1, YS-01...
- Page 2 Batteries Installation: This product can only used with CR 2450 batteries. Never use other kinds of batteries. It is recommended to use Panasonic CR2450 batteries to ensure quality and durability. 1. Make sure the On/Off switch is in the OFF Press position.
- Page 3 Connect to the camera: 1. Slide the flash trigger hotshoe connector into camera hotshoe until it cannot go in any further. 2. Test the flash trigger by pressing the shutter release button of the camera, the LEDs in the front should turn on instantaneously. 3.