Nauticam M24D2R200 Instruction Manual

2508 25087 7 7 7 2508 2508
M24D2R200 M24D2R200- - - - M28A1R170 HDMI M24D2R200 M24D2R200
2.0 Cable 2.0 Cable
2.0 Cable 2.0 Cable
(for NA (for NA- - - - A7RIV
(for NA (for NA
Ninja V housing) Ninja V housing) Ninja V housing) Ninja V housing)
Instruction Manual
F F F F
OREWORD OREWORD
OREWORD OREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recognize the
requirements of professional as well as amateur underwater
photographers and fulfill them through the innovative designs of our
products. We strive to achieve a high level of user-friendliness by
allowing stress-free installation and easy operation of all important
functions of the camera.
Please read this manual carefully before using the product, this will
maximize its performance as well as its lifetime.
W W W W
ARRANTY ARRANTY ARRANTY ARRANTY
All NAUTICAM Products are warranted against any material and
manufacturing defects for two years from the date of purchase for
consumer use, and exceptionally HDMI and SDI cables are limited to one
year. This warranty only applies to products purchased from authorized
NAUTICAM dealers and does not extend beyond the original retail
purchaser.
To return your product for service, please contact your regional
authorized service centre(s). Please note that this warranty only applies
when the product is purchased in the territory where the service centre is
located.
NAUTICAM does not hold responsibility for damage, of any nature, to any
equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning of our
products.
Unauthorized modifications and/or repairs of our products will
automatically invalidate the warranty.
P P P P
RECAUTIONS RECAUTIONS
RECAUTIONS RECAUTIONS
•
Do not place excessive stress on the HDMI cable connector.
•
Do not bend or twist the HDMI cable.
•
Stop using the HDMI cable once visible cut/dent marks appeared
on the external cable, send the cable for service or replace it with
a new one with an authorized service center to prevent leakage
risk.
I I I I P P P P
DENTIFICATION OF DENTIFICATION OF DENTIFICATION OF DENTIFICATION OF ARTS ARTS ARTS ARTS
Camera side connector
M28A1R170 HDMI M28A1R170 HDMI M28A1R170 HDMI
A7RIV/ / / / α2020 α2020 to use with to use with
A7RIV A7RIV α2020 α2020 to use with to use with
Monitor side connector
C C C C
ONNECTING THE CABLE TO THE HOUSING ONNECTING THE CABLE ONNECTING THE CABLE ONNECTING THE CABLE
1. Unscrew M24 accessory port cap
2. Screw #25086 #25086 #25086 M24 Adaptor for HDMI 2.0 #25086
on the M24 port.
3. Insert the HDMI 2.0 cable through the
M24 port. It's recommended to install the
cable first before installing the camera.
4. Gently push the cable into the M24 port
opening of the housing, until it cannot go
in any further.
Make sure the accessory port O-ring is
free of debris and sits tightly in the O-ring
groove.
TO THE HOUSING TO THE HOUSING TO THE HOUSING
Current as of 2021-01-26