Table of Contents
Advertisement
Installer Manual
Installation of combi system
The installation of a EFIT™ 850 with 1 roof system and 1 ground system has been se-
lected .
It is optional if the sensors are connected to the EFIT™ 850 before power on or during
the installation .
The first installed system (System A) is using the output System A .
The second installed system (System B) is using the output System B .
It is freely selectable if System A should be the roof or ground system . However it is
preferable that System A is the roof system, since System A is shown on the upper line
of the display . Please refer to the description of the Display and Combined view in the
user manual .
If sensors for System A are not connected - do it now!
Press
or wait...
System is being scanned to find type of connected
sensors...
Select system type: Roof
(if roof system is preferred as System A)
Wait until correct number of sensors for System A
is found .
Press
when all sensors are found...
System A is installed...
If sensors for System B are not connected - do it now!
Press
or wait...
System is being scanned to find type of connected
sensors...
Select system type: Ground
(if ground system is preferred as System B)
18
Connect sensors:
System A
System A
Scanning...
System type:
Roof
1 Roof sensor
found. Accept?
System A!
Installed
Connect sensors:
System B
System B
Scanning...
System type:
Ground
Advertisement
Table of Contents
