Table of Contents
Advertisement
Installer Manual
Installation of ground system
The installation of a EFIT™ 850 with 1 ground system has been selected .
It is optional if the sensors are connected to the EFIT™ 850 before power on or during
the installation .
The system uses the output System A .
If sensors for System A are not connected - do it now!
Press
or wait...
System is being scanned to find type of connected
sensors...
Select system type: Ground
Wait until correct number of sensors for System A is
found .
Press
when all sensors are found...
System A is installed...
System is being checked...
Press
to configure System A .
(Naming sensors and changing factory settings)
Please refer to "Changing parameters and performance
of systems" in "User Manual" for description of the con-
figurable parameters .
If for some reason you do not wish to configure the
system now you can press
the system .
Press
to end configuration .
to skip configuration of
Connect sensors:
System A
System A
Scanning...
System type:
Ground
3 Ground sensor
found. Accept?
System A!
Installed
Checking system
<------>
Config system:
System A
Press Û to end
configuration.
17
Advertisement
Table of Contents
